Color LCD GSM alarm with SMS

1.Adopt wavecome double frequency GSM module. 2. With color LCD show screen and built-in keyboard 3.11 wireless zones (1 wireless SOS zone, 1 fire alarm zone, 1 external power failure alarm zone , and other 8 wireless guarding zones can be defined by user ) 4.Send SMS to 3 mobile phones automatically while alarming 5.Call 3 phones automatically while alarming and drive wiretap 6.Set the time of arm/disarm/partial arm 7.Arm/disarm/partial arm by the keyboard on the host, remote controller or SMS. 8.Program the host by keyboard on the host or SMS 9.With AC power status monitor function and password protection function 10.Modify the name of 8 wireless guarding zones and check the system status by SMS.

The G2120 is our new security alarm solution for customers all over the world. It based on our previous alarm systems and customers's  feedback results.

★ Functions & Features:

◆ LCD Display and operating by Control panel Keypad;

◆ Bypass mode and armed mode;

◆ Automatic Timing arm or Timing disarm or Timing bypass arm;

◆ Rename the zone names by SMS Commands;

◆ Arm or Disarm by Remote control or Keypad or SMS command;

◆ Configured bypass zone and Normal zone by Keypad;

◆ 11 wireless zones (1 SOS zone, 1 fire alarm zone, 1 external power

failure alarm zone , and other 8 wireless zones can be defined by user ).

◆ Automatic dial pre-set 3 telephone numbers and send SMS to 3 mobile

phones;

◆ Check the system status by SMS Commands;

◆ Based on the GSM communication network, apply to wide range situations.

 

Notice:

1) The specifications of all wireless sensors are the same. 

 2) Bypass: To temporarily deactivate a portion of the input devices, so as not to trigger the alarm system while armed. this is usually done

in homes so that motion sensors can be shut off to allow movement by the occupants, while the system is armed.  More of the terms and

technology about the alarm system please help to see our Technical support page.Thanks.

★ The advantages of the G2120:

1. Bypass mode and Armed mode;

2. Rename Zone names by the users;

3. Automatic timing arm or timing disarm or timing bypass arm;

4. With AC power status monitor function;

5. LCD displays the setting and status;

6. Based on the GSM communication network.

★    Specifications of Control Panel:

Operating Voltage: DC 12V

Standby battery: DC8.4V

Standby battery working time: About 15 Hours

Working frequency: 315MHz or 433MHz

Alarm response time: <8S

Working power consumption: <3W

Consumption:  <1W (while sending message)

Warning Tone: >110dB

Operating Distance of Remote Control: > 50m
Working temperature: -20 degree - + 60 degree
Relative Humidity:  20 % to 95%
GSM network frequency:  900/1800 MHz(Default)          850/1900 Mhz (Optional)
Size:160mm(L)×113mm(W)×38mm(H)